gas_meter_3_large

Exhausters with pre-inlet
Aerzen Positive Displacement Blowers

Zur For pre-inlet cooling the housing is equipped with an additional third socket on the suction side. The lube oil supply is effected by splash oil lubrication. The conveying chamber is sealed by a sealing system. Driving shaft by double radial seal rings with grease barrier. Direction of flow vertically from top to bottom. The drive can be effected via a direct coupling with motor /spur gear or optionally via narrow V-belt.

A design in special materials (GGG 40 / GGG 40.3) is possible.

Intake volume flow 60 up to 45.000 m³/h
Size 13
Suitable for conveying of air
Pressure operation  
Suction operation Absolute pressure at inlet 200 mbar / 400 mbar against atmosphere